Sealless Chemical Fluorine-Stainless Steel Magnetic Drive Industrial Transfer Pump
Pump model: Mag drive pump, Pump Casing Combined: Horizontal Split Pumps.
Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump, Feed pump.
HS Code: 8413701090, Origin:China, Pump warranty: 1 year.
1.Design features of magnetic pump:
Based on the design of traditional corrosion-resistant magnetic pumps, Shijiazhuang Jiemu Machinery Equipment Co.,Ltd, China Top 20 centrifugal pump manufacturer,our company’s design engineer team has undergone repeated experiments, excellent design concepts are absorbed to optimize the structure of parts, completely eliminating magnetic eddy currents and strong magnetic torque, making the product efficient, energy-saving, and environmentally friendly.
2.Structure of magnetic pump:
Magnetic pump (also known as magnetic drive pump) is mainly composed of pump head, magnetic drive (magnetic cylinder), electric motor, base and other parts. The magnetic drive of the magnetic pump is composed of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation sleeve. Back pull structure, convenient maintenance and repair: The reinforcing sleeve is made of carbon fiber reinforced plastic, without magnetic damage and high pressure; In case of contact between the external magnet and the reinforcing sleeve, there will be no sparks, maintaining a high level of safety.
3.Purpose of magnetic pump:
Magnetic pumps can safely transport strong acids, alkalis, highly toxic, flammable and explosive, as well as pure and precious chemical media, making them a unique product for energy conservation and emission reduction in the chemical industry. The pump has been widely used in industries such as petroleum, chemical, electroplating, pharmaceuticals, food, paper selection, printing and dyeing.
Magnetic pump made by Gempump China is widely used for transporting acid, alkaline liquid, oil, rare expensive liquid, poisonous liquid, volatile liquid, and water circulation equipment, especially the pumping and transportation of flammable, leaky, and explosive liquids.The temperaturein point :-20ºC~200ºC.
4.Principle of magnetic drive centrifugal pump:
Its main feature is to use a magnetic coupling to transmit power without any leakage. When the electric motor drives the outer magnetic steel of the magnetic coupling to rotate, the magnetic force line passes through the gap and isolation sleeve, acting on the inner magnetic steel, causing the pump rotor to rotate synchronously with the electric motor, and transmitting torque without mechanical contact. At the power input end of the pump shaft, due to the liquid being enclosed in a stationary isolation sleeve, there is no dynamic seal and therefore no leakage. Magnetic drive pump is a new type of sealless pump that utilizes the principle of permanent magnet transmission technology to achieve contactless torque transmission. There is no mechanical connection between the driving shaft and the driven shaft, and there is no need for a dynamic seal in the structure. Therefore, this type of pump has no seal and can achieve zero leakage.
5.During normal use, as long as the magnetic pump is operated correctly according to the operating instructions, it can achieve the goal of long service life and long cycle operation. Due to the limitations of its own structural characteristics, magnetic pumps usually need to pay attention to the following precautions during use.
(1) Dry operation is strictly prohibited;
(2) Thoroughly remove rust and solid foreign objects from the device;
(3) Before the pump runs, the air inside the pump must be discharged;
(4) The interruption operation time shall not exceed 60 seconds;
(5) Do not operate continuously in reverse;
(6) During operation, if abnormal sounds or vibrations are found, the cause must be quickly identified and the fault must be eliminated;
(7) When it is less than the minimum flow rate, it should not operate;
(8) The normal working state of the pump must be within the performance parameter range required by the contract, otherwise it will affect the axial force inside the pump;
