ISG Products Introduction:
ISG Series Vertical Centrifugal Pump for conveying water and other liquids with physical properties similar to water. Medium temperature below 80 ºC. Suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long distance water delivery, heating, bathroom heating and cooling supercharger and equipment support. The pipeline pump is a pump that is installed directly in a pipeline, it can be installed in a piping system to maximize efficiency and minimize space occupation.
Vertical Inline Centrifugal Pump
Pump Type – Centrifugal, Vertical Inline Centrifugal
Max Flow Rate – 850M³/H
Max Head – 140M
Pump Materials – AISI304, AISI316, AISI316L, Cast Iron, Ductile Iron,
Max Temp – 140°C
Max Viscosity – 200 cst
Max Solid Passage – 10mm
Self-Priming – N
Inlet/Outlet Sizes – 40mm to 200mm
Drive – AC Electric, Bare shaft
Max Suction Lift – 0
Vertical Pump Working Condition:
-
The pump system’s max working pressure is 1.6MPa, i. e. The inlet of pump’s pressure +pump head≤ 1.6MPa, working pressure is 2.5MPa, inlet pressure not exceed 0.3MPa, please note that if exceeding 0.3MPa, the seal of the impeller balance hole is needed to keep balance of shaft force.
-
Suitable liquid: Solid particle should not exceed 0.1% of total volume with shape not exceed 0.2mm, if the liquid containing the small particle, the mechanical seal should adopt durable type.
-
Environmental temperature should be less than 40degree. Relative moisture should not exceed 95%.